Home > Products > Abrasion resistant pipe > Rare earth metal wear resistant pipe >

Rare earth metal wear resistant pipe

Wear-resistant Alloy Composite Pipe Tee

Wear-resistant Alloy Composite Pipe Tee

Wear-resistant Alloy Composite Pipe Tee for the base, lined with super wear-resistant alloy by centrifugal casting, metallurgical combine to form a solid body.

LFC elbow vacuum casting process. Resistant alloy tube both excellent wear resistance, high temperature resistance and impact resistance, but also has good toughness, excellent thermal shock resistance to mechanical properties, welding performance, easy installation.

Especially suitable for high temperature wear cold shock. Such as electric power, metallurgy, coal, mining, cement and other material handling industry. The product is compared with other wear-resistant pipe, long life, cost of investment economy.

Flexure strength (MN/m²)
>610
Tensile strength (MN/m²)
>700
cpecific elongation (%)
5
Cross sedtion
5.1
Impact stretch ratio (%)
>15
Thickness of wearable layer(HRC)
≥50
Hydrostatic test pressure(Mpa)
5.6-12.9
Wear-resistant alloy composite pipe Features

1 A good overall performance
Composite pipe outer wall with steel, lined with high-chromium alloy, the two formed a good metallurgical bond, both high alloy materials for wear and corrosion resistance properties, but also high mechanical strength and less high impact resistance, to solve a single material can be difficult to reconcile the contradictions and abrasion resistance welding, the material play to the best level of performance advantages, the use of safe and reliable.

2 high wear resistance
The composite wear layer composite pipe of high -chromium alloy, containing about 45% of the organization of the hard carbide M7C3 type, since this structure Ki rod- type carbide, and it has a high toughness ; while Ki macro hardness carbide micro- hardness is high (HV1500-1800), in the wear layer above HRC55, so good wear resistance.

3 corrosion resistance, high temperature performance
Since the composition and structural characteristics Ki carbide substrate and the Cr content of the solid solution has a strong heat resistance, corrosion resistance, high temperature or corrosive environment can show good corrosion resistance, wear resistance.

4 advanced, stable composite technology
The wear-resistant pipe and elbow by LFC vacuum casting composite manufacturing process, namely F casting method, with the manufacturing process of composite wear-resistant pipe has the following characteristics:
( 1 ) The process is simple, easy to operate production yield.
( 2 ) Since the process is characterized by high precision tooling size, using an inner tube lined with real high vacuum in the tube by suction casting, so the product, the precise size, density is good.
( 3 ) using the method of vacuum casting process F resistant alloy composite pipe production and elbow, homogeneous and stable performance. Does not appear, cracks holes and other phenomena.
5, good thermal shock performance
Since the inner tube composite wear, thermal expansion coefficient of the outer layer equivalent to a high level and constantly changing rapidly changing conditions occasions inner fragmentation does not occur, the phenomenon of early failure occurred small pipe system running resistance, beautiful appearance beauty.
6. Transportation, installation and ease of use
Alloy composite pipe and elbow quick connector or flange can be welded directly mounted. As the fight against high- performance composite pipe, the pipe diversion occurs when a partial plugging free to percussion, arbitrary cutting, unloading change, installation, maintenance is very convenient.

alloy composite wear-resistant pipe applications

1, power plants and coal transportation systems, dry ash conveying pipe;
2, Stone Coal power plant systems;
3, the other a powder pneumatic conveying systems;
4, hydraulic transmission systems and larger particle size slag slurry transportation;
5, other mining material handling.


Common types of pipe tee
A pipe tee is a type of fitting that has a T shape and is used to join two or more plumbing pipes.
  • Equre tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
  • Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run.
  • Barred tee is used in pipelines that are pigged.
  • Lateral tee has a 45 degree branch from a pipeline.
  • Pipe cross is a fitting that used in the place where four pipes meet with the same diameter include:
    • Reducing cross used for connecting four pipes, the main pipes with the same size, but the dimensions of the branch diameter is smaller than the main pipes.
    • Equal cross in the place where four pipes meet with the same diameter.
  • Forged Tee Fittings are pipe fittings that be formed mainly by forging.
Materials

Carbon steel: ASTM/ASME A234 WPB-WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
Tee Size ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Size range: 1/2 to 72 inches
Pressure: SCH5 to SCH160

Pipe elbows
Welding Bevel acc. to standards:

Industrial Processes : Bending, squeezing, pressing, forging, machining and more

Features of Pipe Tee:
  • There are three female openings in a T shaped pipe tee.
  • There are straight pipe tees which have the same size openings.
  • Reducing pipe tees have one opening of different size and two openings of the same size.
  • There are sanitary pipe tees which are used in waste lines. These kind of pipe tees have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.
  • A cross pipe tee has four equal sized female openings.
  • A wing pipe tee has lugs to fasten the fitting to a wall or stud.
  • A compression pipe tee uses compression fittings on two or more ends.
  • A test pipe tee has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.
Related products of pipe tee:
Applications of pipe tee:
Pipe Tees are widely used in various commercial and industrial applications. Industrial applications include:
  • Chemical processing
  • Petroleum
  • Pulp/paper
  • Refining
  • Textile
  • Waste treatment, Marine
  • Utilities/power generation
  • Industrial equipment
  • Automotive
  • Gas compression and distribution industries
  • Pipe Tees are also recommended for industrial plant fluid power systems.

We are manufacturer of Reducing tee and supply high quality Reducing tee in both large and small quantities worldwide & offer you the best prices in the market.

We have a team of experienced professionals with years of experience in manufacturing.



English Inglés SpanishEspañol
Abrasion resistant pipe
Abrasion resistant pipe usage
Download Abrasion resistant ceramic lined pipes, Bends and elobws specifications & size range
Recommended products
Pipe fittings
Pipe fittings are used to connect pipes.
Welded steel pipes Weld steel pipes
We produce an extensive selection of weld steel pipe
Welded steel pipes Anti corrosion pipe
Anti-corrosio pipe is processed through the preservation
Ceramic-Lined Pipes
from a single spool piece to complete piping systems.
Pipe flanges
Pipe flange are a method of connecting pipes, valves.
Pipe Fitting Accessories
We are passionate in Stub Ends, Bolt Sets, Fasteners
Sunny Steel Blog

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763
Sum Xu