Inconel 600

Inconel 600 Chemical composition:

Inconel 600 Physical properties:
8.4 g/cm³
Melting Point
1370-1425 ℃

Inconel 600 Alloy m inimum Mechanical properties in the room temperature:
Aolly status
Tensile strength
Rm N/mm²
Yield strength
R P 0. 2N/mm²
A 5 %
Brinell hardness
Annealing treatment
Solution treatment

Inconel 600 Characteristic as below
  • Good corrosion resistance property for the reduction, oxidation, Nitric and other media.
  • Good stress corrosion cracking resistance property in both room temperature and high temperature.
  • Good corrosion resistance of the dry chlorine and chlorine hydride.
  • Good mechanical property when below zero, room temperature and high temperature.
  • Good anti-creep rupture strength, with the recommendation of 700℃ or above working environment.
Inconel 600 Metallurgical structure
600 is face-centered cubic lattice structure.
Inconel 600 Corrosion resistance
600 have corrosion resistance to many kinds of corrosive media. Chromium content made it with better corrosion resistance than Nickel 99.2 (alloy200) and Nickel 99.2 ( alloy201,low carbon) in the oxidize environment. Meantime, high Nickel content make this alloy with good corrosion resistance in the reduction condition and alkaline solution, and also effective avoid chlorine-iron stress corrosion cracking. 600 have good corrosion resistance in the acid, acetic acid, formic acid, stearic acid and other organic acid, with medium corrosion resistance in the inorganic acid. The alloy with excellent corrosion resistance in the first and the second recycling use of the high purity water in the nuclear reactor. Especially excellent corrosion resistance to dry chlorine and chlorine hydride applied up to 650 . When nder the high temperature, annealing and state solution alloy have good antioxidant off and high-intensity in the air, 600 can resist the ammonia, nitriding and carburizing atmosphere, but at the turn of the changes in redox conditions, it will be corrosion by parts of oxidation media.( such as green death liquid)

Inconel 600 Application field:
  • Erosion thermocouple sheath of the atmosphere
  • Vinyl chloride monomer production: corrosion resistance to chlorine, hydrogen chloride, oxidation and carbonation.
  • Oxide shaft chloride converted to six fluoride: hydrogen fluoride anti-corrosion.
  • Corrosive alkali metal produce and usage filed, especially the sulfide use environment.
  • Use Chlorine produce titanium dioxide
  • Organic or inorganic chlorine produce: corrosion resistance to chlorine and fluoride.
  • Nuclear reactor
  • Heat treatment furnace flask and components, especially in the carbonization and nitride atmosphere.
  • Petrochemical works production of catalytic regeneration in the application of more than 700℃ recommended the use of 600, in order to obtain a longer service life.
Check to see more information about Special Alloy, Specialist Steel, High-Performance Alloys:

Check to see more information about Special Alloy, Specialist Steel, High-Performance Alloys:

MONEL / Inconel ®alloys
  • MONEL®Monel 400
  • MONEL®alloy K-500
  • Inconel 600
  • Inconel 601
  • Inconel 625
  • Inconel 718
  • Inconel X-750
  • Incoloy 800H
  • Incoloy 800HT
  • Incoloy 825
  • Incoloy 901
  • Incoloy 926
  • Inconel 600
  • Inconel 601
  • Hastelloy B
  • Hastelloy B-2
  • Hastelloy C-4
  • Hastelloy C-22
  • Hastelloy C-276
  • Hastelloy N10675
Other alloys
  • A-286
  • 254SMO
  • Nimonic 80A
  • Invar alloy
  • 904L
  • Duplex S31803

We can provide sectional materials and castings such as bar, rod, tube, pipe, plate, sheet, strip, belt and wire. According to the requirements of the clients, we furtherly customize special alloys, as well as guide samples, high precision spare parts and pressure vessel made of special alloy . They are extensively applied in the fields of oil service, petrochemical industry, national defense, nuclear industry, aviation and power generation, etc.
Other grades available upon request:
304/L, 310, 321, 347, 410, Alloy 59, A-286, B-2, B-3, C-22, X-750, Zirconium
nstrumentation Sizes: I1/8” - 2” [any size on request]
Wall Thicknesses: 0.028 - 0.120
Other sizes available upon request: Up to 48” OD or 1” WT
Delivery requirment:
Marking: SunnySteel, material grade, standard, specification, heat no.
Surface Treatment: Bright annealed, polished outside and inside surface.
Package: Each pipe in a PVC bag and caps on both ends then bundled in wood case, (option: Bundle with knitted plastic bag/stee crate. )
Mill test certificate: according to EN 10204 3.2
Inspection: Third party inspection, or by clints


Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763