Ceramic lined reducer pipe

Ceramic Lined Reducer Pipe is integrally fired ceramic tube , with a special molded ceramic filler pouring inside the pipe reducer assembled.

ceramic-lined-reducer-pipe

Adjustable ceramic tube ceramic lined pipe affixed to the alumina content of not less than 95 %. 200T dry pressure forming , sintering temperature up to 1670 celsius degree. Has a strong high-pressure high-temperature capabilities !

SHS-self-propagating ceramic composite steel pipe and fittings, the new generation of wearable and corrosion resistant engineering pipeline, belongs to "863" Hi-tech Plan products. It is mainly used as grindable granule and corrosives in electric power, metallurgy, mining, coal, and chemical industry when transporting sandstone, coal fines, clinker, and aluminum liquid, etc. It is the ideal wearable and corrosion resistant engineering pipeline, with wear resistance 15 times higher than common steel pipe, smooth inner surface, and favorable liquor resistance.

The composite pipe is composed of three layers: ceramic, intermediate, and steel layers. The ceramic layer is formed by molten alumina at a temperature above 2500℃. The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the steel pipe.

The ceramic-lined steel pipes have numerous exceptional properties including good resistance to abrasion, heat, mechanical and thermal shocks. The pipes are easy to weld and fixing. They are very suitable for the transport of abrasive materials and thus can replace cast ceramic pipes, alloy pipes, and resin-lined steel pipes. They have a wide variety of application in mining, power plants, water conservation and metallurgical, coal, petroleum, and building material industries.

Abrasion Resistant Pipe Solutions

Conveying highly abrasive materials, steel piping systems are under constant attack often over long distances.

Q&A

Because the outer surface behaves like mild steel, the product can be cut and welded with proper procedure in the field, configured into a variety of fittings, and can accept the standard end options of flanges, weld rings and couplings.

Warranty

We are Quality Department tests and ensures all of our products are 100% inspected unreported. To an offer we customers additional corps of mind, all our products carry a 24-month warranty against defects or faulty workmanship.We fluid-flow products such as pipe and fittings, chokes, orifice plates, etc, carry a warranty against, erosion, defects, and/or faulty workmanship.

The warranty is determined to each creator and the maximum duration maximally in service. Should any of the RS fail within the warranty period, We'll replace or repair the defective product (s) at No. end user. Please contact the Sunny steel for details on the How to obtain a warranty for our products.

Inspections

As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.



SUNNY STEEL

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763