Butt weld pipe tee

We are manufacturer of Butt weld pipe tees and supply high quality Butt weld pipe tees accord to A234 of the tolerance please refer ANSI B16.9 the best prices in the market.

Reducing tee
36” x 36” x 26” STD WLD BW REDUCING TEE
ASTM A234 WP22 CLASS 1
Tee OD 26inch
Reducing tee
Tee OD 26inch
Drawing
Drawing: The draws accord to ANSI B16.9, the tolerance please refer ANSI B16.9
Drawing
The tolerance please refer ANSI B16.9
36” x 36” x 26” STD WLD BW REDUCING TEE
36” x 36” x 26” STD WLD BW REDUCING TEE
36” x 36” x 26” STD WLD BW REDUCING TEE
Measurment wall thikness

We have a team of experienced professionals with years of experience in manufacturing.

Product Types:

Size range:

We can offer all kinds of the pipe fittings and can manufacture them according to any drawings.

DOWNLOAD STANDARD

Even welding and smooth weld line, can be substitute for seamless tube after drawing and cold rolling.

ASME B16.9

This Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought factory-made buttwelding fittings in sizes NPS 1 ⁄ 2 through 48 (DN 15 through 1200).

Fittings may be made to special dimensions, sizes, shapes, and tolerances by agreement between the manufacturer and the purchaser.

ASTM A234/ SA234M

ASTM A234/ SA234M Standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service.

These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

Mark accord to A234
Marking accord to ASTM A234
ASTM A234 fitting designation for marking purposes
ASTM A234 fitting designation for marking purposes
Use iron bar support to prevent deformation of butt weld pipe tee
Use iron bar support to prevent deformation of butt weld pipe tee
Wrap the plastic tightly around the pipe to protect the tee
Wrap the plastic tightly around the pipe to protect the tee

Chemical Composition

Grade and Marking Symbol Composition, %
C Mn P S Si Cr Mo
WP22 CL1, WP22 CL3 0.05-0.15 0.30-0.60 0.04 0.04 0.50 max 1.90-2.60 0.87-1.13

Tensile Requirements

Grade and Marking Symbol WP11 CL3, WP22 CL3, WP2 CL3, WP9 CL3
Tensile strength, range Ksi [MPa] 75-100 [520-690]
Yield strength, min, Ksi [MPa] (0.2% offset or 0.5% extension- under-load) 45 [310]

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run. Before buying a Reducing Tee, there is a list of features and specifications one must look into to get the appropriate product. For instance,

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line.

Reducing tee
Reducing tee

Reducing tee has a branch that is smaller than main run allows for branching off to a smaller pipe of equipment from main run.

Equal tees
Equal tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
Lateral Tee
Lateral Tee
A Lateral pipe tee means a pipe fitting which is similar to a tee but has a side opening outlet branch at a 45 degree angle.
Barred tee
Barred Tee
A barred tee is a tee or any fitting with a branch used in pipelines that is pigged and has a restriction bar welded internally preventing the pig from traveling down a branch connection.
5” x 2 ½” Reducing Tee, SUS304 Sch10, SMLS
Stainless Steel Tee

We are manufacturer of Stainless steel Tees and supply high quality Stainless steel Tees in SUS304, SS316 grade offer you the best prices in the market.

Use iron bar support to prevent deformation of butt weld pipe tee
Butt weld pipe tee
We are manufacturer of Butt weld pipe tees and supply high quality Butt weld pipe tees accord to A234 of the tolerance please refer ANSI B16.9 the best prices in the market.


Fitting specification, Standard and identification

There are different varieties of pipe fittings made of various materials and available in various shapes and sizes.



SUNNY STEEL

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763