Home > About Us> Tech & Service
Abrasion resistant pipe

What are the materials and uses of the wear-resistant pipe?

According to the different wear conditions, the wear-resistant straight pipe has different material selection. The function of each material is different, at present there are mainly 4 kinds of materials, including ceramic composite pipe widely used. Materials should be selected according to specific conditions.

According to the pipe material, the wear-resistant tube is divided into the following categories:

Power plant long-term use
Power plant long-term use of rare earth alloy wear-resistant pipes

1, SHS ceramic wear-resistant tube (ceramic composite pipe), used in coal washery, thermal power plant ash, steel mills, cement, etc. (the tube is widely used).

2, ceramic SMD wear-resistant pipe, used for conveying fly ash.

3, surfacing welding wear-resistant pipe, used for sea sand conveying.

4, Bimetal high chromium alloy wear-resistant pipe, used for power plant pulverized coal.

5, ceramic ring wear-resistant tube for the delivery of silica fume.

6, rubber wear-resistant pipe, used in concentrator.

7, polyethylene wear-resistant pipe for pulp conveying.

8. Cast-stone wear-resistant pipe for pulverized coal conveying.

10, Ni-w alloy wear-resistant tube for high-temperature wear and tear transport.

11, liner plastic wear-resistant pipe, used for chemical water.

Properties of the Ceramic-lined Steel Composite Pipes >>
Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion resistant ceramic by SHS ----Characteristics of SHS self-burning ceramic composite pipe
Abrasion resistant pipe specification, Standard and identification

Classification and designation
of wear-resistant pipes
for power industry


Pipe elbows be Long-term
use in power plants

Because the outer surface behaves like mild steel, the product can be cut and welded with proper procedure in the field, configured into a variety of fittings, and can accept the standard end options of flanges, weld rings and couplings.

Abrasive Applications

One-hundred-twenty-nine-million tons of coal ash—a byproduct of the coal burning process—is produced every year. Most power plants transport the coal ash in liquid form to large surface impoundments or in solid form at landfills near the facility through long lengths of steel piping, which can range in length from several thousand feet to miles.

Wear-resisting comparative table of ceramic lined pipe
Sand injection test 30% Transfer test of sludge with SiO2
Material Volume diminution
(cm3)
Material Volume diminution
(cm3)
Ceramic lined
Steel pipe
0.0022 Ceramic lined
Steel pipe
3
Ceramic pipe
Al2O397%
0.0025 S45C 25
Application of Abrasion resistant pipe

Abrasion resistant pipe applied in coal-fired power plant ash and slag discharge tube, powder, powder tube, desulfurization pipeline,in addition also widely used in the following industries:

Q&A

Warranty

We are Quality Department tests and ensures all of our products are 100% inspected unreported. To an offer we customers additional corps of mind, all our products carry a 24-month warranty against defects or faulty workmanship.We fluid-flow products such as pipe and fittings, chokes, orifice plates, etc, carry a warranty against, erosion, defects, and/or faulty workmanship.

The warranty is determined to each creator and the maximum duration maximally in service. Should any of the RS fail within the warranty period, We'll replace or repair the defective product (s) at No. end user. Please contact the Sunny steel for details on the How to obtain a warranty for our products.

Inspections

As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.



About Sunny Steel

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange