Dual phase steel

Duplex Stainless Steel Pipe Duplex Stainless Steel Pipe

We can produce and deliver nearly any duplex material requirement in pipe, tube or fittings.

Dual-phase steel (DPS) is a high-strength steel that has a ferrite and martensitic microstructure. DPS starts as a low or medium carbon steel and is quenched from a temperature above A1 but below A3 on a continuous cooling transformation diagram.

Dual-phase steel (the Super Duplex Stainless Steel, referred to as SDSS), also known as Dual Phase Steel.

Martensitic or austenitic and ferritic matrix two-phase structure is consisting of steel. Generally ferritic and austenitic phase structure that composed of steel called duplex stainless steel, ferritic and martensitic phase structure that composed of steel called a dual-phase steel. The dual-phase steel is low carbon steel or high strength low alloy steel after the heat treatment or control the rolling of the critical region. A typical dual-phase steel yield strength σs 310MPa tensile strength σb is 655MPa. Duplex steel for the manufacture of cold punching, deep drawing and forming of complex components can also be used as a pipeline steel, chain, cold drawn steel wire, prestressed reinforced.

Nature:

It is mainly composed of ferrite and martensite steel, which can be low-carbon steel or low alloy steel by the treatment or control rolling of the critical region. The type of steel has high strength and high ductility, good co-ordination. Now, it has become a high strength, good formability new stamping steel successful for the auto industry.

Through proper control of chemical composition and heat treatment process, both the advantages of ferritic stainless steel and austenitic stainless steel duplex stainless steel due to the characteristics of the two-phase structure, it austenitic stainless steel with excellent toughness and weldability and iron ferritic stainless steel with high strength and resistance to chloride stress corrosion combined with superior performance of duplex stainless steel welding of structural materials has developed rapidly since the 1980s has become a martensitic, Austria steel type's size and ferritic stainless steel side by side.

Special Piping Materials has always been at the forefront of the industry due to the company’s determination to supply its clients with the materials grades that best suit their requirements.

MATERIALS

An example of the range of materials we supply are as follows:

Duplex becomes brittle at extreme temperatures so its use is normally restricted to a maximum temperature of 300 degrees and shows signs of embrittlement at –50 degrees.

The Benefits of using Duplex Stainless Steel Pipe:

Duplex Stainless Steel Pipe is used in:



SUNNY STEEL

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763