Home > About Us> Tech & Service

Bi Metal Clad pipe

Application of Abrasion resistant pipe in Dense Medium System

Serious wear and tear of the pipeline not only caused a lot of material waste and media running, running, dripping, leakage, and frequent pipeline maintenance replacement, increasing the labor intensity of workers, increased production costs.

As the medium pipeline is the transmission of high hardness, abrasive strong media suspension, the pressure of the feed cyclone into the tube, in addition to transport media suspension, but also includes coal and gangue. Therefore, compared with the slime mixed pipeline, the media pipe wear speed faster, especially the pressure pipe, such as the cyclone into the material tube, disengage sieve into the material and so on. According to the different materials and flow channels, the general life of the metal pipe material in about a few months to a year or so.

Coal preparation plant site

Coal preparation plant site

Many types of Abrasion resistant pipe, pipe diameter needs to be measured on-site

In recent years, wear-resistant technology and the rapid development of wear-resistant materials, Abrasion resistant pipe technology in addition to metal mines, construction, power plants and other areas of application, in the field of heavy media coal preparation has also been widely promoted, greatly improving the heavy pipe Of the service life, reducing the maintenance workload and material consumption, and promote the rapid development of heavy media coal preparation technology.

Commonly used wear-resistant media tube

Common wear-resistant pipe mainly stone pipe, ceramic wear-resistant pipe, alloy wear-resistant pipe. Cast stone is a natural rock as the main raw material, by ingredients, melting, burning, annealing made of an inorganic non-metallic materials. It has excellent wear resistance, corrosion resistance.

China's metallurgical, thermal power, mining, chemical building materials and other departments are widely used cast stone materials. The main raw material for the production of cast stone is the broadly distributed basalt and diabase, which are basic magmatic rocks, and the chemical composition is relatively stable. Cast pipe than the alloy tube wear, tough, and has a high corrosion resistance, can be resistant to hydrofluoric acid and overheating of any acid and alkali corrosion. But the cast stone tube density is high, brittle, impatient impact, easy to break, the production process is complex, installation and maintenance is not convenient.

Ceramic wear tube is made of self-propagating high temperature synthesis centrifuge. The seamless steel pipe on the centrifuge tube mold, in the steel pipe by adding iron and aluminum powder mixture. This mixture is called aluminum heat in chemistry. Centrifuge tube mold rotation to a certain speed, the Mars ignited aluminum heat agent, aluminum heat agent immediately burn their own, burning quickly spread, and in the spread of a violent chemical reaction, aluminum heat agent after the reaction of corundum and iron, At the same time release a lot of heat, is the original material in the steel pipe and the reaction after the product, even if the melting point of 2045 ° corundum will all melt, because the reaction is very fast, only a few seconds, the molten reactant in the centrifugal force, Size to be separated. Iron is centrifugal force thrown to the inner wall of steel, Al2O3 is distributed in the inner layer of iron. As the steel pipe quickly heat and heat transfer, Al2O3 and Fe quickly reached the freezing point, and soon stratified solidification. The final formation of ceramic wear-resistant tube from the inside out, respectively, corundum ceramic layer, iron-based transition layer, and the external steel pipe layer. High temperature molten iron liquid

And the Al2O3 liquid, contact with the inner wall of the steel pipe, so that the inner wall of the steel pipe in the semi-molten state, so that the formation of iron and steel pipe metallurgical structure, iron layer and corundum ceramic layer between the liquid formation of a strong combination of its combined strength (that is, Laminated strength)> 15MPa; ceramic wear-resistant tube crushing strength (that is, from the tube outside the tube when the strength of ceramic crushing)> 350MPa.

Ceramic tile lined pipe & fittings

Ceramic tile lined pipe and the traditional steel pipe, wear-resistant alloy cast steel pipe, cast stone pipe and steel pipe and other essential differences. Ceramic tile lined pipe is a seamless steel pipe, the inner layer is corundum, this corundum is molten state under the action of centrifugal casting. Corundum layer hardness up to HV1200 ~ 1400, it is better than the ordinary combination of corundum grinding wheel performance is much better, can be corundum grinding wheel wear off.

Ceramic tube wear resistance is mainly by the inner layer of a few millimeters thick corundum layer, which wear-resistant alloy cast steel pipe, cast stone pipe both by the composition and organization, but also by the thickness of the anti-wear has been a qualitative leap. The same specifications and unit length of the quality of Ceramic tile lined pipe only wear-resistant alloy steel pipe 1/2, cast pipe 1/3; the cost per meter project reduced by 30% to 40%; so ceramic wear pipe in addition to performance Superior, the project cost also has obvious advantages.

Ceramic tile lined pipe with good thermal shock resistance, this performance in the construction of useful. As the outer layer of steel, coupled with the inner temperature does not crack, in the construction, the flange, purge mouth

And so can be welded, can also be used direct welding method for pipe connection, which wear-resistant alloy cast stone pipe and cast stone pipe in the construction is not easy welding and welding can not be better. In case the production site due to special reasons, ceramic wear tube rupture situation, can be immediately emergency welding to ensure safe production and prevent environmental pollution. It should be noted that the thickness of the ceramic layer in the Ceramic tile lined pipe is not uniform, and it is possible to break out during the transportation, installation, tapping and bending deformation between the two stands, resulting in uneven wear during operation and affecting the use Life, and even cause short-term local steel pipe damage.

SHS ceramic lined pipes

Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion resistant ceramic by SHS -------Self-propagating High-temperature Synthetic process.

Ultra-high composite wear-resistant pipe is a combination of internal and external pipe. It is a polymer material as the main material, adding the necessary additives, additives made into wear-resistant inner tube to Q235 steel plate as raw material, coil welded together made of such pipes with high wear resistance, good corrosion resistance (Strength, toughness), impact, play a supporting role, to withstand external pressure, so as to avoid collapse; and to adapt to changes in ambient temperature, light weight, easy to operate processing. Ultra-wear-resistant composite pipe wear resistance, long life, mechanical noise, the use of the product can change the coal preparation plant before the frequent replacement of pipes, downtime for a long time, the amount of maintenance of the situation, that is, improve the efficiency of the coal preparation plant, But also reduce the labor intensity of workers, reducing the maintenance workload. Table 10-16 for the ceramic wear-resistant tube and super-wear-resistant composite pipe technical and economic indicators, for reference.

Recommended UHMW-PE pipes

Ultra-high molecular weight polyethylene (UHMW-PE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight.

UHMWPE wear pipe

UHMWPE wear pipe

UHMWPE pipe bend

UHMWPE pipe bend

UHMWPE pipe for dredging

UHMWPE pipe for dredging

UHMWPE pipe with flange

UHMWPE pipe with flange

Ultra-high molecular weight polyethylene pipe has superior performance over conventional HDPE pipe such as very high wear resistance, impact resistance, excellent resistance to internal pressure strength, resistance to environmental stress cracking, intrinsically self-lubricating, anti-adhesion, low temperature resistance and excellent chemical resistance.

Use and maintenance of Abrasion resistant pipe

First of all, in addition to alloy tube, the current commonly used wear-resistant pipe is to rely on a layer of composite wear-resistant materials to improve the life of the pipeline. No matter what the process, wear-resistant layer and the grass-roots bonding strength and then large, is also a combination of heterogeneous materials, can not achieve a seamless. So the installation, especially the welding process requirements are high.

Second, although the hardness of the composite layer is large, but often very brittle, especially ceramic wear-resistant tube, ceramic layer of the impact resistance is relatively poor. Therefore, in the transport, installation, maintenance process should be strictly prohibited to fall, knock, hit, to avoid the composite layer and the base of the separation. For the composite wear-resistant pipe, if the wear-resistant layer after damage, its wear resistance is lost. For example, in the production of blocking, the use of beat the way to clear the block. On the ordinary pipe can be, but by the wear-resistant layer of the pipeline should be strictly prohibited.

In the pipeline installation process, often due to improper welding lead to wear parts of the wear-resistant layer is more or less destroyed, the general impact of the range of about 2 ~ 5mm in the weld, and even may be part of the shedding, resulting in the resistance of the region Grinding down. Therefore, part of the coal preparation plant in the new plant design, often according to the pipeline design drawings, directly to the manufacturer customization, especially the elbow, tee, elbow, distribution and so on. This puts a higher demand on the design of the medium pipe. There are some plants to take into account the design and construction level, often in the first use of the processing can be better general pipeline, after the normal operation of the system, and the system pipeline after the measured, according to the test drawings to the pipeline manufacturer custom wear pipe.
When necessary to be replaced. Old factory transformation can also be used this approach.

Basic analysis of performance of wear-resisting elbow

wear-resisting elbow

The wear-resistant elbow is widely used in the industry of wear and tear serious such as: thermal power, steel, metallurgy, cement, machinery, coal, mining, chemical, port etc. The wear-resistant elbow has the performance of good wear resistant performance, running resistance is small,corrosion resistant, anti-fouling, good performance, low project cost, easy to install and so son.

Wear-resistant elbow is the use of special temperature-resistant strong adhesive will be special corundum wear-resistant ceramic plate paste in the pipe elbow inside, solve the thermal power, metallurgy, steel, cement and other industries, such as material materials elbow wear serious problems, at the same time, the use of steel pipe elbow and wear-resistant ceramic paste integrated solution to facilitate rapid replacement and construction.

Depending on the working conditions, the production process is also different, you can use the direct paste method, bolt loading method or one molding method.

One pipe forming method (RHS) is the use of selected alumina particles, with a variety of molding methods fired lined pipe, and then with a special filler will be integrated into the pipe pouring in the interior of the pipe. The pipe formed by this method is different from the ceramic composite pipe formed by the celebrate combustion technology, and the inner liner ceramic crystal is identical with the SMD ceramics. The utility model has the advantages that the inner wall of the pipe is smooth and has very good abrasion resistance, which is suitable for the slag and ash removal system with high requirements for the piping material.

The bolt loading method is a ceramic assembling method using adhesive bonding, ceramic chip mutual pressure inserting and bolt mounting card triple fixing. Due to the use of triple fixed method, ceramics and equipment has become one, even if the 1000 ℃ above the high temperature operation, ceramics will not fall off.

Wear-resistant elbow product performance:

1, wear Resistance: ceramic composite steel pipe lining ceramic layer in the Al2O3 content is greater than 95%, micro-hardness hv1000-1500, and thus has a very high wear resistance, its wear resistance than quenched the medium carbon steels 10 times higher than tungsten carbide drilling.
2, corrosion-resistant ceramics are neutral materials, stable chemical properties, with excellent corrosion resistance and acid resistance, can resist a variety of inorganic acids, organic acids, organic solvents, and its corrosion resistance is more than 10 times times the degree of stainless steel.
3, excellent heat resistance, can withstand temperature of more than 2000 ℃, in the scope of -50℃~900℃ long-term work.
4, easy to weld: Ceramic liner composite steel pipe can be welded through the outer steel pipe to achieve the purpose of connection, ceramic liner composite steel pipe can be welded, flange, flexible quick connectors, such as the connection, installation is very convenient.

Application industry:

1. High wear-resistant pipeline: Thermal power generation, Ash (slag) conveying, pulverized coal conveying pipelines, concentrator tailings conveying and concentrate conveying pipelines, port pulp and sediment conveying pipelines, pulverized coal slurry conveying pipelines, etc.
2. Heavy medium Select (WASH) coal plant coal conveying pipeline, high corrosion resistance thermal power desulfurization slurry slag conveying pipeline.
3. Molten aluminum liquid conveying pipeline.
4. High abrasion resistance, high corrosion resistance and high temperature resistance are required.

92% Ceramic Lined Coal Steel Pipes

92% Ceramic Lined Coal Steel Pipes

The ceramic-lined steel pipe is a kind of ceramic and metal organic combining composite pipe, ceramic tube is a combination of alumina the advantages of high hardness, good chemical inertness and steel, excellent wear resistance, corrosion resistance, heat resistance and thermal shock and mechanical shock resistance.

Product features:

The ceramic-lined steel pipe is a kind of ceramic and metal organic combining composite pipe, ceramic tube is a combination of alumina the advantages of high hardness, good chemical inertness and steel, excellent wear resistance, corrosion resistance, heat resistance and thermal shock and mechanical shock resistance.

Product performance:

1, abrasion resistance, ceramic composite steel pipe lined with porcelain layer of Al2O3 content is more than 95%, micro hardness HV1000-1500, and therefore has a very high wear resistance, its wear resistance more than 10 times higher than the medium carbon steel after quenching and is better than that of tungsten carbide drill.
2, the corrosion resistance of ceramics is a neutral material, stable chemical performance, excellent corrosion resistance and acid resistance, can resist various inorganic acid, organic acid, organic solvents, such as its resistance to corrosion is stainless steel is more than ten times.
3, heat-resisting performance, can heat resistance above 2000 ℃, can be in - 50 ℃ ~ 900 ℃ within the scope of work for a long time.
4, easy to welding: the ceramic-lined steel composite pipes can be achieved through the outer steel tube welding connection, the purpose of the ceramic-lined steel composite pipes can be connected by welding, flange, such as flexible quick connectors, installation is very convenient.

Application industry:

1. High wear-resisting pipe: thermal power, thermal power plant pulverized coal ash slag () transmission, pipeline, concentrator tailings conveying pipeline, and concentrate port pulp and sediment pipeline, pulverized coal slurry pipeline, etc.
2. Heavy media select (wash) coal plant coal conveying pipeline, requiring high corrosion resistance thermal power generation desulfurization slurry transport pipeline.
3. Molten aluminum liquid transport pipeline.
4. High wear resistance, high corrosion resistance and high temperature resistance.

High Abrasion 92% Ceramic Lined Coal Steel Pipes

High Abrasion 92% Ceramic Lined Coal Steel Pipes

Due to the High Abrasion 92% Ceramic Lined Coal Steel Pipes have wear-resisting, corrosion resistant, heat resistant properties, thus can be widely used in electric power, metallurgy, mining, coal, chemical and other industries as conveying sand, stone, coal powder, ash, liquid aluminum and other material grinding particles and corrosive medium, is an ideal abrasion resistant pipe.

The features of High Abrasion 92% Ceramic Lined Coal Steel Pipes are as follows:

(1) good abrasion resistance, ceramic composite wear-resistant tube layer for corundum ceramic, mohs hardness above 9.0, equivalent to more than HRC90, so on electric power, coal, metallurgy, mining transporting medium has high wear resistance;
(2) ceramic composite wear-resistant pipe can in - 50 -900 ℃ temperature range of the normal operation for a long time, data linear expansion coefficient (6 - 8) * 10-6 / ℃;
(3) loss of running resistance;
(4) low project cost;
(5) installation construction profit.
The ceramic composite wear-resistant tube is widely used in mining, metallurgy and other professions besides ash, slag discharge pipe, powder and powder.

Application of High Abrasion 92% Ceramic Lined Coal Steel Pipes

Suitable for thermal power, steel, smelting, machinery, coal, mining, chemical, cement, port terminals, and other enterprises of the coal transporting system, pulverizing system, ash discharge and dust removal system all wear large mechanical equipment, can choose according to different requirements of different types of products.

Wear-resistant-pipe-lined-by-ceramic

High Abrasion 92% Ceramic Lined Coal Steel Pipes
High Abrasion 92% Ceramic Lined Coal Steel Pipes 92% Ceramic Lined Coal Steel Pipes
92% Ceramic Lined Coal Steel Pipes
Wear resistant ceramic ring composite steel pipe
Wear resistant ceramic ring composite steel pipe
ceramic tile lined elbow with flange
Ceramic tile lined elbow with flange

Alumina ceramic lining for wear resistant

Ceramic tile lined pipe_process Ceramic patch
Ceramic tile lined pipe process Ceramic patch
Wear resistant ceramic ring
Wear resistant ceramic ring
alumina ceramic lining for wear resistant
alumina ceramic lining for wear resistant

Abrasion Resistant Alumina Ceramic

Fine grain, high-grade alumina ceramic is the industrial workhorse material for combating sliding and fine particle abrasion. Alumina ceramic has a proven track record in providing excellent value in many of the most troublesome wear applications and is typically very economical and appropriate in many environments. Alumina ceramic is versatile in that it can be pre-engineered into complex tiling systems and can be applied from very thin linings of just 1.5mmm or 1/16” thick up to 76mm or 3” thick. Addtionally alumina can be formed into large monolithic pieces and cyliners that can create extremely effective abrasion resistant linings for elbows, pipes, tees and wye fittings.

These lining typical outlast other solutions, like chrome carbide or AR plate by 10 times the wear life and with less weigth.

Abrasion Resistant Alumina Ceramic

Critical to ensuring the success of any lining is it correct installation or application. Time and experience proven applications methods include installing liners using epoxy, weld in tiles, RTV silicone, high temperature mortars, interference and shrink fit, bolt in, key arched designs. The result is a superior wear system. These liners can be formed from monolithic ceramics or take the form of integrated tile systems cut in the green state to fit even the most complex fabrications.

Technical Data 92 series 95 series 
Alumina Content  92  95 
Hardness  ( Mohs) 9 9
Water  Absorption 0.01%  0.01% 
Fluctual Strength 255  275
Bearable Temperature 1400  1400 
Density 3.60-3.62 g/cm3 3.65-3.68g/cm3 

This is a complex process.Our engineers understand wear problems and specify solutions to meet your operational environment. Material properties,tolerances, flatness,attachment methods, and material costs are all considered in a wear solution.

Selection of the appropriate lining method can mean the difference between success and failure in any application.

Typical applications for these ceramic liners include:

  • Wear Panels
  • Mill Liners
  • Classifier Cones
  • Pulverized Fuel Piping
  • Chutes & Hopper Ball Mills
  • Ball mills
  • Coal Pulverizer Housings
  • Exhauster Housings
  • Nozzles
  • Pneumatic Conveying Lines
  • Elbows
  • Cyclone Separators
  • Slurry Lines
  • Coal Valves

Application temperature: up to 1000°C / 1832°F depending on application and geometry.

Advantages: highly wear resistant, smooth surface that lasts, no corrosion, available from 1.5 mm thickness.

Ceramic rubber Wear Liner

Ceramic-Rubber compound lining plate is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of issues such as impact, abrasion and noise.
Features for this kind wear resistant lining:
1) Outstanding wear-resistant performance: the working face of ceramic-rubber compound lining plate is high alumina ceramics, the hardness of which is second to diamond, so it has excellent wear-resistance.
2) Optimum impact resistance: Compared with ordinary ceramic tiles, the Ceramic-rubber plate under the special process treatment changes the ceramic mechanism of easy breakage. With the characteristic of shock absorption of natural rubber, the impact-resistant performance of ceramic will be highly improved which is more than 10 times of ordinary ceramic tiles.
3) Effective noise reduction: excellent damping of natural rubber absorbs a great deal of vibration energy during shocking, and the flexible molecular chain within the natural rubber will be beneficial for damping, which greatly reduces the noise in transportation. Laboratory test indicates the value of noise reduction up to over 30dB.
4) Adjustable specification: the thickness of rubber and ceramic, the shape of ceramic-rubber plate can be adjusted accordingly to fit for the various conveying equipments.

The Type Of Alumina Ceramics

Alumina ceramics are divided into two types: high purity and common type.

Al2O3 content of high purity alumina ceramics is 99. More than 9% of the ceramic material, due to the sintering temperature up to 1650-1990 ℃, the transmission wavelength of 1 ~ 6 microns, usually made from molten glass to replace platinum crucible; It is used as the sodium lamp tube with its transmittance and alkali resistance. In the electronics industry, it can be used as integrated circuit board and high frequency insulation material.

Ordinary alumina ceramics are divided into 99 porcelain, 95 porcelain, 90 porcelain and 85 porcelain in accordance with Al2O3 content. Sometimes the content of Al2O3 is in 80% or 75% of the ceramic series. Among them, 99 alumina ceramic materials are used to make high temperature crucible, furnace tube and special wear-resisting material such as ceramic bearing, ceramic seal and water valve, etc. Alumina porcelain is mainly used as corrosion resistant and wear-resisting parts; In China, due to the constant incorporation of the sliding stone, the electrical performance and mechanical strength can be improved with metal sealing, such as molybdenum, niobium and tantalum, and some used as vacuum devices.

Features

High hardness
Rockwell hardness of high alumina ceramics is up to HRA80-90 which is second only to diamond and far exceeds wear-resistant steel stainless

Excellent wear resistance
The wear resistance of high alumina ceramics is 266 times that of manganese steel and 171.5 times that of high chromium cast iron.According to our investigation & follow-up to the clients, the service life of equipment can be prolonged over 10 times under the same working conditions.

Corrosion resistance
High alumina ceramics are inorganic oxides with extremely stable molecular structure and no electrochemical corrosion, thus they can resist erosion of acid, alkali, salt solutions and organic Solvents.

Thermostability
Working temperature of high alumina ceramics can be as high as 1400℃.

Good self-lubricity
High alumina ceramics have the properties of self-lubricity and inadhesion, the roughness is only 1/6 that of steel pipes thus less flow Resistance.

Light weight
The density of high alumina ceramics is about 3.6g/cm3, which is only half that of steel, thus easy for construction and installation

Alumina Ceramic Lined Coal Pipes

Alumina Ceramic Lined Coal Pipes
Alumina Ceramic Lined Coal Pipes

Our organization is the manufacturer high quality Fly ash Handling pipes,coal pipes, Bend & Pipe, elbows, reducer pipes straight pipes etc. These pipe are designed and lined with high quality Alumina ceramic material like alumina rings, alumina tiles etc .

We can produce Ceramic lined pipes as per customer's requirement and application.

Applications

1. The coal fired thermal power plant
2. Steel Industry
3. Mechanical industry
4. Chemical Industry
5. Mine, coal industry
6. Cement industry
7. Smelting industry

Product Advantages

1. Superior wear resistance
2. Chemical and impact resistance
3. Erosion resistance
4. Smooth inner wall
5. Easy installation
6. Saved maintenance time and expenditures
7. Longer service lifetime
8. Competitive and reasonable price

Wear Resistant Ceramic lined Pipe

Wear Resistant Ceramic lined Pipe

The Wear Resistant Ceramic lined Pipe (wear resistant ceramic pipe,cheap ceramic lined pipe) of the laminable tube is used to glue the ceramic sheet of alumina ceramic to the inner wall of the pipe with high temperature and high temperature. After the heating and curing, it forms a strong anti-friction layer.

The production process of this product is relatively simple, the production cycle is short, the cost is relatively low. Wear-resisting bend (wear resistant ceramic pipe)just as its name implies is a relatively traditional is more wear-resisting bend (wear resistant ceramic pipe), adopted the new wear-resistant plastic production, used in large industrial, currently occupies the market share of around 80%.

Technical details of the Wear Resistant Ceramic lined Pipe

 Items   Index
  Alumina content 92%
  Bulk Density 3.62g/cm³
  Rockwell Hardness (HRA) 90
  Compressive Strength 850MPa
  Fracture Toughness 4.8MPa.M1/2
  Bending Strength 290MPa
  Thermal Conductivity 20℃ 20W/m.k
  Coefficient of Thermal Expansion 7.2×10-6m/×m.k
   Young's Modulus  20℃ 277GPa
   Shear Modulus   20℃ 113GPa
  Surface  Finish: As Fired 1.27mm

Abrasion Resistance Ceramic Lining Pipe

Abrasion Resistance Ceramic Lining Pipe

Our Abrasion Resistance Ceramic Lining Pipe are high quality Fly ash Handling Bend & Pipe, elbows, reducer pipes straight pipes etc.These pipe are designed and lined with high quality Alumina ceramic material like alumina rings, alumina tiles etc .

We can produce Ceramic lined pipes as per customer s requirement and application.

Applications of Abrasion Resistance Ceramic Lining Pipe
1.The coal fired thermal power plant
2.Steel Industry
3.Mechanical industry
4.Chemical Industry
5.mine, coal industry
6.Cement industry
7.Smelting industry

Abrasion Resistance Ceramic Lining Pipe Advantages
1.Superior wear resistance
2.Chemical and impact resistance
3.Erosion resistance
4.Smooth inner wall
5.Easy installation
6.Saved maintenance time and expenditures
7.Longer service lifetime
8.Competitive and reasonable price

Additional Information:
Minimum Order Quantity: 3 Pcs

Cast basalt lined steel pipe

Cast basalt lined steel pipe

After 30 years of practical use proved cast basalt lined steel pipe is a reliable and effective combination of wear—resistant materials. Be used in a variety of transportation of corrosive materials in working condition.

Cast basalt lined steel pipe is consist of steel pipe, cast basalt pipe and the concreteness of cement mortar.

The excellent performance of cast basalt lined steel pipe is that it sets tenacity of steel pipe, abrasive resistance of cast basalt pipe, concreteness of cement mortar in one.

This greatly improves the products adaptive capacity in complicated operation conditions. At the same time. cement mortar is selected as the filling material and this can make the inside surface of steel pipe in alkali mediums. So the surface of steel pipe generates purifying films. These films can prevent being rusted.

The parameters of the outside steel pipe will be decided according to the working pressure of the system.

The connection of the pipes and fitting will be of flange connections, easy—flexible joint connection or by welding.

Cast basalt lined steel pipe, as both a wear—resistant and corrosion—resistant materials, the transport properties of wear or corrosion of materials, after thirty years of practical verification, cast basalt lined steel pipe can be well done.

Flange connection is one kind of common pipeline installation connections. By two pieces of flanges,pipeline,valve,equipments are connected and it forms a tight piping system. When pipeline pressure is larger, flange connection is priority secection. Flanges have lots of differents sizes. Flange size is determined according to pipeline normal diameter and pipeline operation pressure.

Abrasion resistant pipe specification, Standard and identification

Because the outer surface behaves like mild steel, the product can be cut and welded with proper procedure in the field, configured into a variety of fittings, and can accept the standard end options of flanges, weld rings and couplings.

Application of Abrasion resistant pipe

Abrasion resistant pipe applied in coal-fired power plant ash and slag discharge tube, powder, powder tube, desulfurization pipeline,in addition also widely used in the following industries:

Q&A

Self-propagating high temperature synthesis (SHS) is used to describe a process in which the initial reagents (usually powders), when ignited, spontaneously transform into products due to the exothermitic heat of reaction.

A well-known example of SHS reaction is the thermite reaction given below:

化学反应式

This reaction generates temperatures above the melting point of alumina and is used in the thermit welding process for joining railway lines.

Several other terminologies - such as combustion synthesis, gasless combustion or self-propagating exothermic reaction - are used to describe the process.

The types of material that can be formed using this process include metal borides, silicides, carbides, nitrides, sulphides, aluminides and oxides.

Abrasive Applications

Coal preparation plant site
+ Suitable for conveying coal


Straight pipes be
Long-term use in power plants


Pipe elbows be Long-term
use in power plants

One-hundred-twenty-nine-million tons of coal ash—a byproduct of the coal burning process—is produced every year. Most power plants transport the coal ash in liquid form to large surface impoundments or in solid form at landfills near the facility through long lengths of steel piping, which can range in length from several thousand feet to miles.

Limestone slurry is also commonly used by coal-fired plants for the effective removal of sulfur dioxide and hydrogen chloride from flue gases. These wet scrubber flue gas desulfurization (FGD) systems utilizes a pumped in limestone slurry through which flue gas containing SO2 is passed in absorber spray towers. The limestone slurry reacts with the flue gas, removing the SO2. The limestone in slurry is then converted into calcium sulfate. This waste material produced by the process is then pumped out from the bottom of the spray towers through steel pipe for further treatment for use in commercially viable by-products such as gypsum board and cement.

To deal with the extremely abrasive and caustic nature of these various slurries, plant maintenance managers are looking to a variety of “abrasion resistant” steel pipe products and accessories to replace standard mild steel pipe in these high wear areas.

Pipe Options

Most abrasion resistant pipe options operate on the premise that when two objects meet, the harder object wins. As such, products are available in a variety of increasing hardness, measured on the Brinell Scale from A-R steel (200 BHN) through iron cast pipe (up to 800 BHN).

Unfortunately, any product that is very hard throughout the wall thickness is also brittle. This brittleness is unacceptable as piping systems are constantly flexing and moving as a result of pressure surges and spikes and due to mechanical and physical contact at the facility.
However, one type of pipe delivers the best of both worlds: an induction hardened pipe with an abrasion resistant inner surface that tapers to a strong, yet ductile outer surface.

At 600 BHN, the inner surface of this induction hardened pipe can withstand most common abrasives and tapers to a 250 BHN outer surface that is ductile enough to accommodate normal handling during shipment, installation and maintenance. With this process, pipe can be created in various diameters up to 40”, in varying lengths and wall thickness.

Warranty

We are Quality Department tests and ensures all of our products are 100% inspected unreported. To an offer we customers additional corps of mind, all our products carry a 24-month warranty against defects or faulty workmanship.We fluid-flow products such as pipe and fittings, chokes, orifice plates, etc, carry a warranty against, erosion, defects, and/or faulty workmanship.

The warranty is determined to each creator and the maximum duration maximally in service. Should any of the RS fail within the warranty period, We'll replace or repair the defective product (s) at No. end user. Please contact the Sunny steel for details on the How to obtain a warranty for our products.

Inspections

As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.

ction for all products.



About Sunny Steel

Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.