Home > Products> Alloy steel pipes/tubes> ASTM A333 Alloy pipe/tube>

ASTM A333 Grade 7 Seamless Pipe

ASTM A333 Grade 7 Standard covers seamless and welded steel pipe for low temperature service. The ASTM A333 Grade 7 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 7 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
ASMT A333 Grade 7 seamless pipes
ASTM A333 Grade 7 covers seamless and welded steel pipe for low temperature service. The Grade 7 alloy steel involved is similar to AISI 4032 low alloy steel.
Seamless and Welded Steel Pipe size for Low-Temperature Service:
  • Outer Dimensions: 19.05mm – 114.3mm
  • Wall Thickness: 2.0mm – 14 mm
  • Length: max 16000mm


Application: Seamless and Welded Steel Pipe for Low-Temperature Service.

Steel grade: ASTM A333 Grade 7, ASME SA333 Gr.7

Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A333 Grade 7 Chemical Compositions(%)
Compositions Data
Carbon(max.) 0.19
Manganese 0.9
Phosphorus(max.) 0.025
Sulfur(max.) 0.025
Silicon 0.13-0.32
Nickel 2.03-2.57
Chromium
Other Elements
Mechanical properties for ASTM A333 Grade 7 Alloy Steel
Properties Data
Tensile strength, min, (MPa) 450Mpa
Yield strength, min, (MPa) 240 Mpa
Elongation, min, (%), L/T 30/16.5
Impact requirements:
the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.
Referenced Documents
  • ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
  • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
  • ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
  • ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials


Alloy steel pipes
Recommended products
Pipe fittings
Pipe fittings are used to connect pipes.
Welded steel pipes Weld steel pipes
We produce an extensive selection of weld steel pipe
Welded steel pipes Anti corrosion pipe
Anti-corrosio pipe is processed through the preservation
Ceramic-Lined Pipes
from a single spool piece to complete piping systems.
Pipe flanges
Pipe flange are a method of connecting pipes, valves.
Pipe Fitting Accessories
We are passionate in Stub Ends, Bolt Sets, Fasteners
Sunny Steel Blog

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763
Sum Xu