Home > Products > Fittings > Pipe elbows > Short radius elbows >

90 degree Short Radius Elbow

Sunny Steel are Manufacturer of 90 degree Short Radius Elbow. The 90 degree Short Radius Elbow manufactured using superior grade raw materials. The 90 degree Short Radius Elbows are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

ASME B16.9 90 degree Short Radius Elbow Dimensional Tolerance
Stainless pipe elbows ASME B16.9 Butt weld 90 degree Short Radius Elbow Dimensions
NPS O.D.
D
Center-to-End
A
1 33.4 25
42.2 32
48.3 38
2 60.3 51
73 64
3 88.9 76
101.6 89
4 114.3 102
5 141.3 127
6 168.3 152
8 219.1 203
10 273 254
12 323.8 305
14 355.6 356
16 406.4 406
18 457 457
20 508 508
22 559 559
24 610 610
ASME B16.9 90°Short Radius Elbow Dimensional Tolerance
Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter
at Bevel (D)
+ 1.6
- 0.8
1.6 1.6 + 2.4
- 1.6
+ 4
- 3.2
+ 6.4
- 4.8
+ 6.4
- 4.8
+ 6.4
- 4.8
Inside Diameter at End 0.8 1.6 1.6 1.6 3.2 4.8 + 6.4
- 4.8
+ 6.4
- 4.8
Center-to-End (A) 2 2 2 2 2 2 3 5
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness


An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Elbows are categorized based on various design features as below:

Size range:
Elbow Size

Recommended type of pipe elbows:

Materials
  • Carbon steel: ASTM/ASME A234 WPB-WPC
  • Alloy steel: --WP 22-WP 5-WP 91-WP 911
  • Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
  • High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70
  • Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
    • ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
    • ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Abrasion resistant elobw
SHS-self-propagating ceramic composite steel pipe and fittings, the new generation of wearable and corrosion resistant engineering pipeline, belongs to "863" Hi-tech Plan products.

It is the ideal wearable and corrosion resistant engineering pipeline, with wear resistance 15 times higher than common steel pipe, smooth inner surface, and favorable liquor resistance.

Standards
  • GB/T12459-2005 GB/T13401-2005 GB/T10752-2005 SH/T3408-1996 SH/T3409-1996
  • SY/T0609-2006 SY/T0518-2002 SY/T0510-1998
  • DL/T695-1999 GD2000 GD87-1101
  • HG/T21635-1987 HG/T21631-1990
  • ASME B16.9-2007 ASME B16.25-2007
  • MSS SP 75-2008 MSS SP 43-2008
  • CSA Z245.11-05-2005
  • EN10253-1-1999 EN10253-2-2007 EN10253-3-2008 EN10253-4-2008
  • DIN2605-1-1992 DIN2605-2-1995
  • BS1640-1-1962 BS1640-2-1962 BS1640-3-1968 BS1640-4-1968 BS1965-1-1963
  • AFNOR NF A 49-289-1990 AFNOR NF A 49-170-1-1999 AFNOR NF A 49-170-2-2009 AFNOR NF A 49-170-3-2009
  • AFNOR NF A 49-170-4-2009 ISO3419-1981 ISO5251-1981
  • JIS B2311-2009 JIS B2312-2009 JIS B2313-2009
  • ASME B16.9 Butt weld 45 degree Long Radius Elbow Dimensions
Pipe elbows
Butt Weld Pipe Fitting Bevel
  • All welded pipe fittings have bevelled end to allow for ease of welding.
  • This bevel allows for full penetration weld in most cases.
  • There are two types of bevels;
    Plain Bevel and Compound Bevel: according to the bevel of welding pipe fittings construction .
  • ASME B16.28, Buttwelding Short Radius Elbows and Returns
Industrial Processes: Bending, squeezing, pressing, forging, machining and more ANSI/ASME B16.25, Buttwelding Ends
ANSI/ASME B16.25 Standard covers the preparation of butt welding ends of piping components to be joined into a piping system by welding.
Application of pipe elbows:

Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.

ELL & ELLS
  1. A wing of a building at right angles to the main structure.
  2. A right-angled bend in a pipe or conduit; an elbow.


English Inglés SpanishEspañol
Weldable Components

Stainless steel pipe fittings

Recommended products
Pipe fittings
Pipe fittings are used to connect pipes.
Welded steel pipes Weld steel pipes
We produce an extensive selection of weld steel pipe
Welded steel pipes Anti corrosion pipe
Anti-corrosio pipe is processed through the preservation
Ceramic-Lined Pipes
from a single spool piece to complete piping systems.
Pipe flanges
Pipe flange are a method of connecting pipes, valves.
Pipe Fitting Accessories
We are passionate in Stub Ends, Bolt Sets, Fasteners
Sunny Steel Blog

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763
Sum Xu